NEWER VERSION AVAILABLE
All of the downloads on this page have been replaced by a newer version.
Please read How to Update Mozaik Software to the Latest Version to ensure that you are running the latest software.
Version 12.3.13
Download Version 12.3.13 - Added 14 March 2024
- Fixed an issue that could cause nailers to extend through finished skins
- Fixed an issue that could cause bifold hinge holes not to show up on doors
- Fixed an issue that could cause closet rods with additional sections below to behave improperly in the interior tab.
- Bottom into back joints that are at 270 degrees should behave more as expected (some manual adjustments may still be required depending on desired joint)
- Fixed an issue that could cause edits to panel fastener operations not to "stick"
- Fixed an error that could occur when stretching parts with certain operations
- Fixed an issue that could cause user added door/drawer front parts to receive the incorrect texture
- Optimize Open Job dialog should now show dates in the proper format
- Fixed an error that can occur when clearing a product interior
- Fixed an error that could occur when generating a change order
- Fixed an issue that could cause incorrect tray widths in cabinets with negative scribes
- Fixed an issue that could cause subpanel reveal formulas not to behave correctly
- The Mozaik plugin should now work properly with Sketchup 2024
- When printing labels, variables that reference non-numeric parameters should now display properly
- Fixed an error that could occur when using custom joint fastener templates with dado grooves
- Fixed an issue that could cause incorrect g-coding for certain arc-shaped parts
- Added a safety check to prevent errors from entering huge dovetail drawer values
- Fixed an error that could occur when using advanced hinges and parts that are flush against the door
- Fixed an error that could occur when using the Scribe dialog on certain cabinet configurations
- Fixed an issue that could cause custom parameter added operations to overwrite other operations
- Image/sketchup cutout parts on routed doors should no longer receive hinge cup boring
Version 12.3.12
Download Version 12.3.12 - Added 25 March 2024
- Fixed an issue that could prevent per-sheet overrides for small part handling from being saved properly
- Fixed an error that could occur when pricing a job with toeskins of length 0
- Fixed an issue that could cause the name of certain Mozaik products not to appear in the Help/About "Authorized For" label
- Fixed an issue that could cause visual artifacts when using certain tool groups
- Fixed an issue that could cause certain joint fasteners to appear in incorrect locations
- Buyout doors should now receive proper advanced hinge configurations
- Fixed an issue that could cause visual oddities when showing diagonal moldings on elevation view
- Fixed an issue that could cause incorrect hinge center lines on the hinge report when using 5-piece doors and advanced hinges
- Fixed an error that could occur when creating an overly narrow 5-piece door
- Fixed an issue that could cause panel hinge holes to be incorrectly placed on certain door types/configurations
- Fixed an issue that could prevent dado breaks from appearing on nailer->end joints
- Fixed an issue in which doors applying advanced hinge holes to adjacent products could select the wrong hinge model
- Fixed an issue that could cause frameless cabinets with scribe not to behave as expected
Version 12.3.11
Download Version 12.3.11 - Added 8 March 2024
- Fixed an error that could occur when using LScribe or RScribe in certain formulas
- Fixed an issue that could cause certain inside radius toolpaths to gcode incorrectly
- Fixed an issue that could cause the red dot during drill simulation to appear in the wrong place
- Fixed an error that could occur when a custom parameter is set to change part type but no part type is selected
- The Parts Library no longer lists labour values for door/drawer front parts, as pricing information for these parts is calculated from the Door Library
- Fixed an issue that could cause certain joint fasteners with Fixed Locations not to appear
- Fixed an issue that could cause angled backs not to receive joint fasteners into ends properly
- Fixed an error that could occur when adding a new user parameter
- Fixed an exception that can occur when manually adding a part
- Fixed an error that could occur when setting a side to type "Face" in certain shaped cabinets
- Fixed an issue that could cause the UserState.xml file to become corrupt if Mozaik is not closed properly
- Fixed an issue that could cause user dimensions to round differently depending on zoom level
- Fixed an issue that could cause open toolpaths in custom guides/joint fasteners not to appear in the same direction between left/right panels
- Fixed an error that could occur when sending countertops of thickness 0 to Sketchup
Version 12.3.10
Download Version 12.3.10 - Added 27 February 2024
- PartW, PartL, PartTh formula variables should now work in the Optimizer
- Removed 8-character limit to Cabs column in TigerStop export
- Fixed an issue that could cause certain formulas from panel fasteners not to be applied properly
- Fixed an issue that could cause incorrect frameless rail shapes on front shaped cabinets
- Optimizer will now properly recognize flipside pockets without a perimeter toolgroup as on the flipside
- Fixed an issue that could cause multiple advanced hinge configurations of the same type to be checked as "use"
- Fixed an issue that could cause formulas applied to door part sizes, shapes, or locations not to show up in certain views
- Fixed an error that could occur when choosing "Close Job" from the File menu in certain cases
Version 12.3.9
Download Version 12.3.9 - Added 20 February 2024
- The Optimizer will no longer require new jobs to have the abbreviation field filled in
- Fixed an error that could occur in the Pricing Tab when a job contains parts of zero length
- Fixed several issues that could cause optimizer results not to be properly arranged for table saws
- Fixed an issue that could cause qualified frame dado tenons to have a "lip"
- Fixed an issue that could cause automated toe skins to be too long
- Added new PLOAD post variable for SCM Maestro posts
- Fixed an issue that could cause operation formulas on insert parts to behave incorrectly
- GIN & GOU Values in bSolid post now allow positive values to allow helical ramping with conventional & climb cut
- Fixed an issue that could cause the selected Room subtab to change incorrectly when selecting T-Walls
- Fixed some visual issues with the 3D renderer that could occur with full-depth open toolpaths
- Fixed an issue that could cause drawer box fasteners not to appear on certain shaped drawer box joints
- Fixed an issue that could cause inset not to be applied to door panels correctly
- Fixed an issue that could cause front toes to extend too far in certain cases
- Fixed an issue that could cause dado grooves with formulas to not break properly with joint fasteners
- Fixed an error that could occur when using certain custom parameters on the Order Entry tab
- Fixed an error that could occur when hiding/unhiding certain operations
- Created output for Excitech Weihong Auto Labels
Version 12.3.8
Download Version 12.3.8 - Added 29 January 2024
- Fixed an error that could occur when optimizing shaped parts with a very large numbers of points
- Fixed an issue that could cause copying joint fastener locations not to remember whether it's fixed or array
- Fixed an issue that could cause hinge holes on doors to be incorrect in horizontal grain in certain cases
- Operations from adjacent cabinet, when using AutoLBThruBore, should now try to match flipside state of other operations
- Fixed an issue that could cause edge banding not to be applied properly on notched applied slab doors
- Fixed an issue that could cause certain shaped pockets not to be gcoded when using "Use Dado Tool"
- Fixed an issue that could cause TigerStop export not to generate files for every part width
- When viewing operations in high detail, multi-depth toolpaths with more than 2 nodes will now show up as simplified operations only
- Adjusted the output of Anderson Autolabel post's CSV output
Version 12.3.6
Download Version 12.3.6 - Added 15 January 2024
- Reduced minimum length of a cabinet side to receive legs from 8 inches to 6
- Fixed an issue that could cause the edges of a SketchUp model not to move along with the rest of the part when using the Explode feature
- Fixed an issue that could cause miter door frame edges not to align correctly
- When switching between array and fixed joint fastener location definitions, data should no longer be cleared
- Fixed an issue that could cause insert operations not to appear in certain cases
Version 12.3.5
Download Version 12.3.5 - Added 07 January 2024
- Fixed an issue in which copy/paste operations might not "stick" after closing the shape editor
- Fixed an issue in which turning off high detail beading was incorrectly having an impact on beading toolpath depth
- Fixed an issue that could cause top stretchers between partitions not to adjust properly for frameless rails
- Fixed an issue that could cause linebores to show up as series of individual holes incorrectly
- Fixed an issue that could cause back dados not to appear correctly on certain shaped cabinets
- Fixed an issue which could cause custom male joint fastener operations not to be oriented properly
- FrameDadoD parameter description now properly reads "Case into Frame Dado Depth"
- Fixed an issue that could cause hinge adjustments on top/bottom hinged doors not to be applied properly
- Middle legs along the back of a simple rectangular cabinet will now be rotated to face the same direction as middle legs along the front
- Fixed an issue that could cause flipside toolpath bulge formulas not to behave properly
- Raised Optimize sheet limit from 1000 to 10000
Version 12.3.4
Download Version 12.3.4 - Added 23 December 2023
- Fixed an issue that could cause Equal Door Widths not to work properly on frameless cabinets with end scribe > 0
- Fixed an issue that could cause fixed shelves not to dado properly on certain front-shaped cabinets
- Advanced guide operations into ends should no longer be incorrectly affected by DoorOutset parameter
- Fixed an issue that could cause shallow negative bulges not to be gcoded properly in toolpaths
- Fixed an issue that was causing incorrect sharp corner annotations on open toolpaths in Biesse
Version 12.3.3
Download Version 12.3.3 - Added 21 December 2023
- Fixed a load error that was introduced in 12.3
- Fixed an error that could occur when clicking Import Updated Data grid
- Fixed an issue that could cause incorrect entry point on Squaring Cuts (introduced in 12.3)
- Fixed an error that could occur when adjusting the width of an angled corner cabinet
- Fixed an issue that could cause adjustable shelf holes to be applied to both partitions in a double partition incorrectly
- Fixed an issue that could cause door price per sqft not to "stick" after editing
Version 12.3.2
Download Version 12.3.2 - Added 16 December 2023
- Fixed an issue which could cause pocketing tool to not get transferred from joint fastener definition to part
- Expanded width of Legs drop down in settings tab
- Corrected an import issue in Import Updated Data
- Fixed several issues regarding sharp corner tooling - certain radiused and inside-radiused shapes were not getting sharp corners where they should have been. Also, when using a sharp corner tool by itself on a toolpath, that path will now receive sharp corners if necessary.
- Fixed an error that could occur with certain adjacent cabinet configurations
Version 12.3.1
Download Version 12.3.1 - Added 15 December 2023