We’re excited to release Mozaik 14.0 through our Open Beta release. This release is fully featured, thoroughly tested, and ready for live deployment. This gives you early access to the features and improvements, while we finalize training materials, resource libraries, and additional support content.

Before updating, we suggest watching the full feature overview. In the coming days, we’ll be rolling out additional training videos to help you get up and running.

Mozaik Version 14 Open Beta

Please see the full list of features and improvements below:

Materials and Textures

• Textures in the 3D viewer are now derived from the materials used, which will result in more accurate 3D views.
• Material templates can now be overridden at the room or cabinet level resulting in much fewer material templates needed for unique situations.
• Material templates can now be specified at the base/wall/tall level per room.
• Added Texture Groups to allow users to group various textures together and have them apply to a material. Examples of a texture group would include stains, paints, Egger TFL colors, etc. Materials with texture groups applied will be limited to the texture images within that group.
• Textures in Mozaik can now have various "Sheen" levels set for them, as well as different visual widths and heights, Pricing, Transparency, Metallicness, or Clear Glass properties.
• Added the ability to specify whether a texture has grain and derive whether a part can be rotated or not in the optimizer based on its graphic texture.
• Introducing Dynamic Materials - Materials may now have {Texture} or {TexAbbr} in the cutlist name or abbr. fields, creating a new material for each texture assigned to it. For example a material with a cutlist name of 18mm Egger_{Texture} will result in 18mm Egger_Halifax Oak if “Halifax Oak” is used as the graphic texture. This will result in fewer materials and templates needed for users using prefinished materials.
• Added 2 new categories of EdgeBand part types - EdgeBand5 and EdgeBand6
• Added the ability to give a unique label or comment to edge banding numbers in Parts Library. For example, if you use Edgeband #3 for doors, you can add a label for “doors” to the banding to make it easier to track.
• The Materials Library now allows headers to make it easier to organize.
• Part textures in the 3D viewer are now always aligned according to the particular part orientation, including diagonals.
• Added the option to price materials by board feet.
• Added a textures table in Pricing - Option to price textures area as a separate category
• Added a variety of new graphic only room-level texture categories and corresponding item types/subtypes and insert types have been added. For example we have added upholstery texture type, and changing this will change the color of a sofa, assuming the SKP is painted with the default color.

3D Viewer

• Improved the navigation in the 3D viewer to make it easier to get the ideal view of your designs.
• Improved the visual quality of the 3D viewer, including the ability to visualize various sheens of materials.
• Added the ability to light the room with a HDRI environment leading to more attractive appearance and better visualization of a material’s sheen.
• Added 3D viewer settings to control the opacity of lines.
• Added performance settings to ensure the 3D viewer performs to the best of its ability based on individual hardware specifications.
• Orbiting in the 3D viewer should now orbit around the object you clicked on
• Added the ability to save 3D viewer settings and preferences as defaults.

Mozaik Cloud Rendering

• Added a cloud rendering engine to Mozaik to create physically based photorealistic rendered images of your designs. Renderings are processed on our cloud servers, eliminating the need for high-performance local hardware.
• Materials rendered will now show realistic lighting conditions, including the ability to light a rendering using a HDRI image.
• Added the ability to render mirror reflections, as well as realistic glass materials.
• Added a “Lights” Hardware item allowing users to specify spot or linear lights, and account for them in plans and pricing. Lighting will visually show up in Cloud Renderings only.
• New Batch Rendering feature allowing to Mozaik to render multiple images at once.
• Added an expanded export option to export renderings including title blocks.

CAD

• A new CAD Toolbar has been added to the Products and Tops tab, allowing you to add CAD and Annotation items directly on your designs. Items added here are visible and editable in Multiprint, and vice versa.
• Added new tools in Multiprint: Offset, Trim, Extend, Join, Explode, Divide, 3-Point Arc
• Annotation Layers were added to allow users to categorize their CAD and Annotation items and control the color and visibility. An example would be “Customer Notes” or “Shop Notes”
• Products that are dropped into CAD  shapes have the option to conform to those shapes automatically.
• Added the Ability to type in measurements when using the Move tool.
• Polylines and polygons can now be locked to 45/90 angles when drawing and measurements may now be typed in.
• Polylines may be connected to their own beginning while drawing so they form a closed polygon automatically
• Various snapping and user experience improvements to CAD tools.

Drawings and Layers

• Added a new Drawing Templates editor. Templates must be saved via this editor. The new menu can be found at File>Preferences>Drawing templates.
• Added the ability to hide and overrides (Add or change text) individual automatically places dimension items on plans and elevations. These overrides will be removed with relevant changes to the design.
• Added a new drawing mode that will display drawings using a color derived from the texture being used.
• Added new "Multiprint Font Points" font scaling type in the Products Tab, etc. to ensure that dimensions and text appear as they will when printed or exported. Auto-dimension padding can now be set to use multiprint pixels so that it scales more consistently with respect to zoom.
• Door swings on floor plans will now draw for all face types - unless a bifold hinge is applied
• DXF imports to multiprint may now be imported in inches.
• Line weights now show up as a number on the layers view
• Custom cutlist tables are now accessible as automated lists in Multiprint
• Various new dimension options  including "Outside" positioning, "Closed Arrow" and "Dot" end styles, "Fixed" positioning logic, etc.’ Dimensions can now use open arrows or dots
• Notes may now have transparent backgrounds
• Added new wall angle layer to floorplans
• Refactored auto-dimensions and user added dimensions to ensure they look more consistent.

Cyncly Payments

• Integrated the Cyncly Payments service to the pricing tab. Mozaik customers can now generate credit card or ACH payment links and send them to their customers in second. Sign up directly via the pricing tab “Sign Up” button, or by emailing paymentsinfo@cyncly.com. Available to customers in the USA only.

Import Updated Data

• New design and features for Import Updated Data, with new data including inserts, textures, and products, etc.

Other changes

• Added new 2 label image types to show parts with banding material abbreviations rather than template labels
• Sketchup export overhaul - all non-SKP-model objects are now exported as Mozaik generated meshes so everything will match our viewer consistently
• Door cutouts in walls no longer add an elevation adjustment to prevent touching the floor
• Added a "Room Notes" option.
• Added new "Above Wall Cabinet" snap-to selection
• Metal drawer parts will now be listed as parts in Assembly Sheet tables instead of as whole drawer boxes
• The TScribeWRef parameter now applies to both wall and tall cabinets
• Added an Invoice or Quote number in pricing tab, as well as various formatting options.

Download Mozaik Version 14

As always, Please read all updated documentation and watch all available videos on each newer version when updating. This is paramount, especially if updating from older versions. Many aspects of Mozaik are updated, modified, changed, and improved as we progress with the software.

Open Beta 8

• Fixed an issue that could cause individual part texture overrides not to show up in the Cutlist tab
• Wall end caps are now be considered part of the basic boundaries of a floorplan schematic in Multiprint
• Renders should now be centered within title blocks when printing
• Textures on SketchUp parts and products should now be oriented vertically
• Changed the warning message that pops up when trying to add a light and no light type has been selected
• Adding a texture from an image outside of the relevant texture folder will now automatically copy the image file for you into the relevant folder
• Materials may now be set to "All Textures" instead of locking to a particular texture group. This will allow textures from any group to be selected with the Texture Chooser dialog. This is the new default setting.
• Added a search box for the Texture Group Editor dialog
• Fixed an issue that could cause drawer boxes without a drawer front not to appear in the Drawer Cutlist
• Fixed an issue that could cause banding labels to appear upside down on label printouts
• Materials that have dynamic textures should now be marked as having grain if the applied texture is marked as having grain
• Fixed an error that can occur when using radius parts
• Countertop materials may no longer be set to one-sided
• Fixed an issue that could cause incorrect dado groove toolpaths
• Drawing a dimension on the Products Tab or Multiprint will now display the current length as you draw it
• Fixed an issue that could cause incorrect group edit box positioning when editing a group within a plan or elevation in Multiprint

Download Version 14 Open Beta 8 - Added 21/06/2025

If you're having trouble installing, please drop us an email at help@cadmate.com.au

Previous Updates

Open Beta 7

• Wall end caps/adjacent wall representations in elevation view should now color by texture when "Filled with Texture Color" is selected, and should match the height of the adjacent wall
• T-Walls now show texture color properly in plan view
• Fixed an error that could occur with certain material template/texture setups
• When drawing dimensions using CAD tools/multiprint, they will no longer attempt to snap to 10 mm or 1/2 inch increments
• Fixed an issue that was causing snapping onto lines in multiprint to behave incorrectly in certain cases
• Fixed an issue that could cause a red X when using certain annotations
• Fixed an error that could occur on launch when using Cyncly Pay
• Fixed an issue that was preventing importing insert/product libraries from Import Updated Data
• Fixed an error that could occur when viewing metal drawer cutlists

Download Version 14 Open Beta 7 - Added 14/06/2025

Open Beta 6

• Fixed an issue that could cause edge banding materials that include {Texture} in the cutlist name not to get the proper texture name
• Fixed an error that can occur when opening the Door Library
• Copying a material in the Materials Library should now also add "(Copy)" to the cutlist name
• Materials library now warns you when two different materials share the same cutlist name
• Zooming should now feel smoother on the Products Tab at close levels
• Fixed an issue that could cause slowdowns when zooming in with Suppress Small Dimensions turned on
• Fixed an issue that could cause up/down arrows in "Other" category of Job Parameters to work incorrectly
• Fixed an issue that could cause wall/tall texture selector to show the incorrect texture group
• Added ability to drag/drop texture images in the Materials tab
• Using "Switch Source Library" should no longer automatically change your selected autofill library
• Increased size of banding markings on Part w/Banding drawings on labels
• Created autolabel output for Nanxing AutoLabel machines from CNC Automation
• Fixed an error that could occur when selecting a texture
• Fixed an error that could occur when printing labels with plans or elevations
• Fixed an issue that could cause incorrect razor gage scribe marks on certain more complicated cabinet faces
• Fixed an issue that could cause "New Job" not to work in Optimize
• Fixed an issue that could cause pulls and other SketchUp parts to appear in the wrong location when exporting to Sketchup
• Added ability to import hardware lights and material textures

Download Version 14 Open Beta 6 - Added 08/06/2025

Open Beta 5

• Color choosers will now remember custom colors between sessions
• {Door Size} and {Drawer Front Size} line items will no longer be included in length by width totals in custom cutlist reports
• Fixed an issue that can cause advanced door hinge adjustments to be applied incorrectly
• Added new label variable {Opt_TextureAbbr}
• Fixed an issue that could cause imported texture groups not to place their image files in the right place
• Copied hardware legs should now properly generate operations and show up in hardware/pricing lists
• Add 2 postvars <Add180ToVerticalLineBoreAngle> and <Add180ToHorizontalLineBoreAngle> to resolve an issue involving Weeke/woodWOP linebore

Download Version 14 Open Beta 5 - Added 02/06/2025

Open Beta 4

14.0 features:

• Added emissive light color and intensity to Graphic Product Properties dialog (Right Click>Properties) as well as added a list of all Sketchup material names from the model.
• Added HDRI rotation setting

14.0 Bug fixes:

• Fixed an issue where flattening schematics could ignore fills
• Fixed an issue that could cause incorrect snapping within drawings when drawing certain objects are present in Multiprint
• Fixed an issue that could cause missing textures in the settings tab and other issues after importing new textures and texture groups from Import Updated Data
• Fixed an error that could occur when closing Mozaik
• Fixed an issue that could prevent the Open Job dialog from scrolling to the selected job when typing a name in the Search box

Mozaik 13.1 Bug fixes:

• Fixed an issue that could cause changes to Toolpath Properties to not "stick" properly
• Tab option should no longer be enabled for machines that use specialty posts that do not support tabs
• Fixed an error that could occur when previewing/printing labels containing Elevation views
• Fixed an issue that could prevent right-clicking on countertops in Floorplan view
• Fixed an issue that could cause a glitching/flickering appearance in the Parts tab of the Optimizer
• Fixed an issue that could cause wall mount panels not to receive wall banding assignment templates

Download Version 14 Open Beta 4 - Added 31/05/2025

Open Beta 3

14.0 Bug fixes:

• Fixed an issue that could cause incorrect combo material template categories to appear

Mozaik 13.1 Bug fixes:

• Fixed an issue that could cause incorrectly shaped doors on triangular front-shaped cabinets
• Added an "are you sure" dialog to deleting title blocks, and changed default option to "No" on several "Are you sure" prompts
• Added new postvar <AddSharpCornersToArcs> for BiesseWorks customers that will place sharp corners on arcs as well as straight lines
• Fixed an issue that could cause arcs to go the wrong direction when GCoding for WeekeWoodWop
• Labels that use the JobAbbr variable will now show the full job name if no abbreviation is provided

Download Version 14 Open Beta 3 - Added 24/05/2025

Open Beta 2

14.0 Bug fixes:

• Fixed an error that can occur when generating a cutlist when using certain banding templates

Mozaik 13.1 Bug fixes:

• Fixed an issue that could cause dado breaks not to be created when other dado grooves are placed close by
• Corrected a couple of issues that could also incorrect razor gage scribe marks
• Fixed an error that could occur when minimizing/unminimizing Multiprint
• Fixed an issue that could cause skin offset not to be applied properly when using stay down nesting and return skin
• Fixed an issue where changing door styles in certain cases was wiping manual edits (operations, report name, etc) incorrectly
• Pricing rows that should not display a total number (blank rows, header rows) should no longer display one in Pricing Reports
• Fixed an issue that could cause insert operations with elevation of 0 not to appear on parts
• Fixed an issue that could cause staydown nesting to miss certain part sides for certain angled shapes
• Fixed an error that can occur when editing values in the Parameters tab of the Product Editor
• Fixed an error that could occur with certain products along curved walls
• Fixed an issue that could cause the wrong part shape to be displayed in TPACad when using single part processing
• Fixed an issue that could cause missing guide holes when using both drawer boxes and rollout trays

Download Version 14 Open Beta 2 - Added 23/05/2025

Open Beta 1

Download Version 14 Open Beta 1 - Added 15/05/2025