Mozaik Version 13 - Current Version

Click the links to watch the V13 Training Videos.

Updates for Mozaik Version 13 can be found below.

Features and Improvements

Mozaik

• Added a "Glass" layer that may be turned off to allow cabinet interiors to be seen through glass doors in elevation views, etc.
• A new layer was added to "Dimension Invisible Walls"
• A new "Wall Fills" layer will fill walls with light grey on the floor plan view in Wireframe/Hidden Line modes
• Added a new layer "Show for Face Frame" for door dimensions so that you can see door sizes on elevation/face views for Face Frame cabinets
• Tools may now be marked as "Pocket" type and "Use Pocket Tool" is now an option for pocketing tools
• Added Job Notes option to the Job tab. Notes can be defined, and used as variables throughout Mozaik.

Optimizer

• Nested parts can now be bumped in 4 directions. Keyboard shortcuts are also added to bump, rotate, and group/ungroup parts.
• Added a “Cutout Tool per Material” option to toolsets. This option will be available when multiple cutout tools exist in the same toolset. Users may define a default cutout tool, as well as add a unique cutout tool per material.

• Added a "Sequence Large Parts First" checkbox. This can often save 1 or more sheets per job, depending on the quantity and size of the parts.
• Part cutout toolpaths can use a “Staydown” strategy.
• Added Zoom Extents button to Optimize Patterns tab
• Added "Reverse Roll Label Order" option for printing roll labels in the Optimizer.
• Added "Add for Blind Bore" field to Tools Library to allow for depth adjustments to compensate for tool geometry for holes that do not drill through the material. 
• Columns may be hidden in the Optimizer’s Parts tab.
• The Machine setup dialog has been reorganized. Saw and CNC subtypes have been added, and conflicting settings for each have been removed. 

• Parts can now be packed to all corners of a sheet. 
• Added ability to set minimum remnant size for Auto-cut Remnants
• New <XZeroBL> post variable was added to allow for top-right and bottom-right machine origins. 
• GCode output directories can now be defined per machine.
• Custom GCode Filenames can now be specified
• A new Toolpath properties dialog was added, encompassing all existing Cutout and Dado options.

• Toolpath/Dado/Pocket Properties are now stored per machine instead of once globally.
• You can now set First Pass or Second Pass to climb or conventional in Cutout Properties
• Rectangular pockets may now be set to Spiral or Raster with an optional radius
• Cutout toolpath sorting algorithm revamped - toolpaths are now sorted to minimize tool travel distance - small parts may be optionally sorted by area

Optimizer - Enterprise features

• Added support for single-part machining centres, including Point-to-point pod and rail machines, Vertical CNCs, and Horizontal drill and dowel machines. In the initial release, post processors will be available for Biesse, Homag, and SCM machines, however, more machines will be supported in the future. We will also have the ability to support machines that process .cix, .mpr and .xcs file formats. 

• Optimizer Runs - Break larger jobs into smaller runs by adding the capacity to save multiple optimizations for one job.

• Machine Templates - Users can choose which parts to send to which machine(s) based on the part properties. Special cases can also be added.

• A new CSV formatting tool has been added to allow users to customize CSV files for Beam Saw export. 

Download Mozaik Version 13

As always, Please read all updated documentation and watch all available videos on each newer version when updating. This is paramount, especially if updating from older versions. Many aspects of Mozaik are updated, modified, changed, and improved as we progress with the software.

Mozaik Version 13.0.4

• Fixed a couple of issues that could prevent stay down nesting from working properly
• Fixed an issue that was causing "Sequence Large Parts First" to work incorrectly
• Fixed an issue that could cause open toolpaths consisting of entirely bulges to gcode improperly
• Fixed an error that could occur when SysHoleSpacing is set to 0
• Fixed an issue that could cause grain-matched doors to be placed incorrectly when using certain pack corner settings
• Fixed an exception that could occur when generating files for certain single-part-processing machines
• Fixed an issue that can cause very narrow raster pocket toolpaths to begin/end out of bounds
• Fixed an issue that could cause very narrow spiral pocket toolpaths to loop too many times
• Fixed an issue that could cause dimensions, tops, and moldings to be drawn incorrectly when certain wall joint configurations are used
• Fixed an issue that could cause grouped parts to be arranged incorrectly when dragging onto a sheet in Optimize

Download Version 13.0.4 - Added 28 June2024

If you're having trouble installing, please drop us an email at help@cadmate.com.au

Previous Updates

Mozaik Version 13.0.3

• Fixed an issue that could cause multi drills not to retract in certain cases
• Fixed an error that can occur when reoptimizing a sheet

Download Version 13.0.3 - Added 19 June2024

Mozaik Version 13.0.2

• Fixed an issue that was causing helical lead-in/lead-out to be on the wrong side if using conventional and climb at the same time
• Subassembly doors placed in rooms other than order entry will no longer show up on Hinge Reports
• Fixed an issue that was causing custom parameters applied to left applied door cabinets to not apply properly
• Custom parameters looking for adjacent products will now work with overlap at any elevation
• Added inch/mm option to eTemplate laser import
• Fixed an issue that could cause custom cutlist reports not to respect selected rooms/cabinets
• Fixed an error that can occur when unlocking layers in multiprint

Download Version 13.0.2 - Added 13 June2024