NEWER VERSION AVAILABLE
All of the downloads on this page have been replaced by a newer version.
Please read How to Update Mozaik Software to the Latest Version to ensure that you are running the latest software.
Version 12.2.9
Download Version 12.2.9 - Uploaded 30 November 2023
- Added fix for exporting labels to paperless shop apps
Version 12.2.8
Download Version 12.2.8 - Uploaded 20 November 2023
- Fixed an issue that could cause hinge holes to appear on incorrect part
- Materials are now sorted alphabetically in Material Template editor dropdown
- Fixed an issue that could cause incorrect Door Part/Assembly Labor pricing values (hour estimates are now rounded to 2 decimal places instead of 1)
- Rear top stretchers when choosing Along Depth Between Partitions should now notch blind dados from the rear
- Negative bulge intersections in user toolpaths (not cutouts) should no longer be joined with a mini-arc, but will now meet in a sharp corner if possible
- Added JBE Autolabel
Version 12.2.7
Download Version 12.2.7 - Uploaded 6 November 2023
- Fixed an error that could occur when mirroring radiused cabinets
- Fixed an issue that could cause top/bottom shapes not to properly update immediately after changing end types
- Fixed an issue that could cause missing shelf pin operations
- Fixed an error that could occur when copying a partition
- Sinks added from a product library should now consistently default to sink cutout properties as specified in Top Settings dialog
- Fixed an issue that could cause certain bulge/line intersections not to GCode properly
- Added a potential fix for issues with exporting to database over a network drive
- Fixed an issue that could cause certain items in a custom cutlist report not to be rolled up that should be
- Parts marked as high detail should now show grooves and large holes (>1/2" diameter) in high detail mode as well as pockets/toolpaths
- Spacer holes should no longer attempt to drill when diameter or depth is set to 0
- Fixed an issue where RazorGage scribe marks were not taking ends-to-floor on wall cabinets into consideration properly
- Added a new beading option to turn off high-detail beading in the 3D viewer to prevent slowdown when using doors with complex beading profiles
- Added support for iGolden Auto-Label output
Version 12.2.6
Download Version 12.2.6 - Uploaded 13 October 2023
- Fixed an error that could occur when viewing cutlists/assembly sheets
- Part colors should now properly "stick" (and export to Optimizer) after being changed in Product Editor
- Fixed an issue that could cause adjacent cabinets not to show up properly in elevation views
- Sharp corner tools that come very near to material depth will no longer be automatically assumed to be thru-cut
- When printing Job Information, customer information and job notes may now be moved to their own page
Version 12.2.5
Download Version 12.2.5 - Uploaded 9 October 2023
- Using multisplit on Frame Inset/No Rails should now equalize drawer/door sizes, not opening sizes
- Fixed an issue that could cause certain dado grooves to cause errors when exporting to SketchUp
- Fixed an issue that could cause operations with formulas to be incorrectly located after exporting to Optimize
- Fixed an error that could occur when clicking on certain parts of the table in Import Updated Data
- Added more space to Cab column in Hinge Mounting and Boring Locations report for long cabinet numbers
- Corrected an issue that was unwittingly causing errors in older GOLA libraries
- Fixed an issue that could cause incorrect edgebanded shapes on certain part shapes
- Fixed an issue that could cause door swings to appear in incorrect locations on floor plan drawings
- Fixed an error that could occur when changing certain products to a subassembly
- Fixed an issue that could cause beading not to be applied to separate panels on routed doors
- Fixed an issue that could cause applied dividers to not be flush with door/drawer panels
- Fixed an issue that could cause toekicks to appear on cabinets incorrectly with certain tiny notches
- Fixed an issue that could cause jobs created in the Optimizer to have an incorrect "Created Date" listed in the Job Manager
- Fixed an error that could occur when trying to create a new pricing report in the Pricing tab
- Fixed an issue that could cause formulas on insert parts not to be calculated properly
- Fixed an issue that could cause top->back parameter not to be applied correctly in certain configurations
- Fixed an issue that could cause the third profile label in some editors to incorrectly read “Applied Molding”
- Squaring cut trim should now show up properly and consistently in Flipside Printouts
Version 12.2.4
Download Version 12.2.4 - Uploaded 22 September 2023
- Fixed an issue that could cause hinge holes to get applied to the incorrect part in certain setups
- Fixed an issue where SuperAdmin roles could be defaulted to having no rights to other user jobs
- Fixed an issue that could cause certain IF formulas to return incorrect values
- Fixed an issue that could cause Width textbox in Face tab not to update properly after changing rail/stile width
- Fixed an issue that could cause precision snapping in MultiPrint not to work properly after resizing schematics
- Door Cutlist by Material/Room reports in Print Job should now include drawer front parts
- Fixed an issue that could cause shelves not to dado in partitions with certain top shape layouts
- Fixed an issue that could cause dado breaks not to be applied around joint fastener holes that are more off center
Version 12.2.3
Download Version 12.2.3 - Uploaded 12 September 2023
- Fixed an issue that could cause concave radiused shapes to GCode incorrectly
- Fixed an issue that could cause black squares when printing certain images on Zebra printers
- Fixed an issue that could cause dimensions attached to DXFs imported to Multiprint not to be scaled properly after flattening
- Sharp corner segments (when generated by Mozaik) should now use plunge rate instead of feed rate (this may not apply to certain specialty posts)
- Fixed an error (red X) that could occur in elevation view when certain layers were turned off
- Fixed an issue that could cause door panel toe notches not to appear correctly if using bottom adjustments
- Fixed an issue that could cause job dashboard changes to cause closet products to change end types
- Fixed an issue that could cause pull holes and pull models on tall doors to be inconsistently positioned
- Fixed an issue that could cause shelf pins not to line up on partitions in certain line bore setups
- Fixed an issue that could cause faces to reset when changing rail width in some cases
- Flipping a shape in the part editor should no longer mark that shape as user-overridden
Version 12.2.2
Download Version 12.2.2 - Uploaded 26 August 2023
Version 12.2
Download Version 12.2 - Uploaded 15 August 2023